Question 1

RESPONSIBILITY

Accepted Answer

Coating Specialist, LLC to apply products per recommendation and to meet and exceed contractual obligations

Question 2

PRODUCT

Accepted Answer

Enter your answer here

Question 3

HAZARD ANALYSIS

Accepted Answer

Proper Personal Protective Equipment (PPE); Proper Safety equipment (eye protection, ear protection, gloves, respirator, steel toed boots, properly suited with vest & hard hat (harness in lift))   HAZARDS:   Hazard Analysis form

Question 4

EQUIPMENT

Accepted Answer

Question 5

LABOR FORCE

Accepted Answer

DRIVER – Drives the truck on rail or bridge.   BOOM OPERATOR – operates crane and unfolds machine and goes under bridge or over wall.

Question 6

BASIC DAILY PLAN

Accepted Answer

1.  Check that all necessary equipment and PPE for proper application PRIOR TO LEAVING FOR SITE.   2.  Show up on site ON TIME   3.  CONTACT THE SUPERVISOR of job site. Share and understand prep-work, equipment needed and application process.   4.  Fill out, go through and sign HAZARD ANALYSIS   5.  Fill in the CHECKLIST throughout the entire process (time, temperature and pictures)   6.  COMPLETE prep work.   7.  COMPLETE product application.   8.  REVIEW days work with supervisor and have them sign off.

Question 7

PROCEDURE

Accepted Answer

Prior to operation, daily inspection of all moving parts. Grease all zerks. Grease terot. Inspect that spring lock is engage If needed, ensure that rail gear is properly engaged. Check for any hydraulic leaks. Make sure that all drivers and operators are clear on mission for the day. Operate equipment, keeping in mind all pitch points.